Tube Fittings

We supply a wide range of tube fittings for industrial purposes.

Product Range

Tube fittings connect runs of tubing (for in-line, offset, multi-port, and mounting configurations) to other tubing sections, pipe, hose, or other components. Systems are typically configured with straight sections connected by fittings or specially formed connections and joints. Generally, tubes and their fittings are defined with exact rather than nominal dimensions. In other words, a tube outer diameter will often measure exactly 1.5 inches if rated with a 1.5″ OD.

Tube fittings are distinguished based on their connection types and the functions they perform. Stainless steel tube fittings are offered for both instrumentation and industrial applications. Other materials include Alloy 400, Alloy C-276, carbon steel, and brass. Stainless steel tube fittings are available in three designs.  These designs were specifically developed to intermix and interchange with the tube fittings used in vast majority of today’s analytical and process instrumentation applications.

Our tube fittings are precisely manufactured to meet the international standards and qualities. We also provide various tube fittings of different sizes, distinct grade and from low pressure to high-pressure ratings and from standard to customized design.  Tube fittings designed to connect a tube to pipe threads are called connectors. Our major tube fittings are Twin Ferrule compression type Tee, Caps, Plugs, Bulkhead connectors, Male Female connectors & elbows which are available in mm & inch. Twin ferrule fittings are high-quality fittings with a double ring. They are for easily and securely applying a fully closing high-pressure connection from, to and between steel tubing. Bulkhead fittings are designed to fit through holes drilled in panels or enclosures to provide a way for a fluid line to pass through the wall of the panel or enclosure. In essence, the only difference between a bulkhead fitting and a normal fitting is the additional length of the fitting “barrel” and a special nut used to lock the fitting into place in the hole.

Tee fittings join three fluid lines together. Tees may have one pipe end and two tube ends (branch tees and run tees), or three tube ends (union tees). Special tube fittings are made to terminate tube connections, so they are sealed up instead of open. A piece designed to seal off the open end of a tube fitting is called a plug, while a piece designed to seal off the end of an open tube is called a cap. Achieve leak-tight performance with a robust tube grip and vibration resistance. Swagelok tube fittings deliver a leak-tight, gas-tight seal in an easy-to-install, disassemble and reassemble form. The robust tube grip with patented, two-ferrule technology is resistant to vibration fatigue and withstands high pressures and temperature extremes.

SUPERLOK Tube Fittings are produced by a  strict management of materials, high precision design, and the best machining technologies. SUPERLOK Tube Fittings tighten easily and are leak free under shock, vibration and temperature cycling. The use of SUPERLOK tube fittings results in additional productivity and cost reduction for the end user. The best interior surface finish in the industry reduces particle entrapment, potential contamination and improves the flow of fluids and gases.

Related Products

Electrical Products

We are the suppliers for a wide range of electrical products like Cables & Wires, Explosion proof light fittings, Cable Glands, Earthing & Lightning Protection, etc.

Mechanical Products

We provide the highest quality mechanical products like Pipes , Flanges, Fittings, Fasteners, Valves, Gaskets & Packing and the more to any part of the globe.

Safety Products

We supply Safety products for Road Safety, PPE Products and Industrial Safety products which are required by Safety Associations.